Switch(config)# ip telnet
Telnetd daemon enabled.
Switch(config)# exit
Switch# show line telnet
Telnet ===============================
Telnet Server : enabled
Session Timeout : 10 (minutes)
History Count : 128
Password Retry : 3
Silent Time : 0 (seconds)
This example shows how to enable https service and show current https service status.
Switch(config)# ip https
Switch(config)# exit
Switch# show ip https
HTTPS daemon : enabled
Session Timeout : 10 (minutes)
4.4.22 ip session-timeout
Command:
ip (http | https) session-timeout <0-86400>
Parameter:
http
https
<0-86400>
Default:
Default session timeout for http and https is 10 minutes.
Mode:
Global Configuration
Usage Guide:
Use "ip session-timeout" command to specify the session timeout value for http or https service. When user login
into WEBUI and do not do any action after session timeout will be logged out.
Specify session timeout for http service.
Specify session timeout for https service.
Specify session timeout minutes. 0 means never timeout
Command Guide of WGSW-28040
83