Restore-Default; Show Config - Planet WGSW-28040 Command Manual

This example shows how to delete backup firmware image from flash.
Switch# delete system image1

4.27.5 restore-default

Command:
restore-default
Mode:
Privileged EXEC
Usage Guide:
Use "restore-defaults" command to restore factory default of all system. The command is equal to "delete
startup-config"
Example:
This example shows how to restore factory defaults.
Switch# restore-defaults
Restore Default Success. Do you want to reboot now? (y/n)n

4.27.6 show config

Command:
show (running-config | startrup-config | backup-config)
Parameter:
running-config
startrup-config
backup-config
Mode:
Privileged EXEC
Show running configuration on terminal
Show startup configuration on terminal
Show backup configuration on terminal
Command Guide of WGSW-28040
321