Snmp User - Planet WGSW-28040 Command Manual

Mode:
Global Configuration
Usage Guide:
The community support basic & advace mode.
Basic: community assigned view and read/write right.
Advace: community assigned access group.
The community specifies the group witch must exist.
The community specifies the view witch must exist. It will generate the no exist v1 or v2 access group for community.
The configure can use 'show snmp community' to check
Example:
The following example specifies that configure community test.
Switch(config)# snmp communit public rw
Switch(config)# snmp communit test1 view all ro
Switch(config)# snmp group group2 version 2c noauth read-view all write-view ""
Switch(config)# snmp community test2 group group2
Switch# show snmp comunity
Commnunity Name Group Name View
Access
-------------------- ------------------------------ ------------------------------ ------------
public all rw
test2 group2
test1 all ro

4.24.6 snmp user

Command:
snmp user USERNAME GROUPNAME [auth (md5|sha) AUTHPASSWD]
snmp user USERNAME GROUPNAME auth (md5|sha) AUTHPASSWD priv
PRIVPASSWD
no snmp user NAME
Parameter:
USERNAME
Snmp user name
Command Guide of WGSW-28040
287