Spanning-Tree Bpdu-Filter; Spanning-Tree Bpdu-Guard - Planet WGSW-28040 Command Manual

4.26.14 spanning-tree bpdu-filter

Command:
spanning-tree bpdu-filter
no spanning-tree bpdu-filter
Mode:
Port Configuration
Usage Guide:
This command per port configures the STP BPDU Filter status. The configuration could be shown by "show
spanning-tree interface" command.
Example:
This example sets port gi1 STP BPDU Filter status to enable.
Switch# configure
Switch(config)# interface gi1
Switch(config-if)# spanning-tree bpdu-filter

4.26.15 spanning-tree bpdu-guard

Command:
spanning-tree bpdu-guard
no spanning-tree bpdu-guard
Mode:
Port Configuration
Usage Guide:
This command per port configures the STP BPDU Guard status. The configuration could be shown by "show
spanning-tree interface" command.
Example:
This example sets port gi1 STP BPDU Guard status to enable.
Command Guide of WGSW-28040
311