Ipv6 Mld Snooping Vlan Parameters - Planet WGSW-28040 Command Manual

MLD Snooping last member query counter: admin 2 oper 2
MLD Snooping last member query interval: admin 1 sec oper 1 sec
MLD Snooping last immediate leave: disabled
MLD Snooping automatic learning of multicast router ports: enabled

4.17.5 ipv6 mld snooping vlan parameters

Command:
ipv6 mld snooping vlan <VLAN-LIST> last-member-query-count <1-7>
no ipv6 mld snooping vlan <VLAN-LIST> last-member-query-count
ipv6 mld snooping vlan <VLAN-LIST> last-member-query-interval <1-60>
no ipv6 mld snooping vlan <VLAN-LIST> last-member-query-interval
[no] ipv6 mld snooping vlan <VLAN-LIST> router learn pim-dvmrp
[no] ipv6 mld snooping vlan <VLAN-LIST> fastleave
ipv6 mld snooping vlan <VLAN-LIST> query-interval <30-18000>
no ipv6 mld snooping vlan <VLAN-LIST> query-interval
ipv6 mld snooping vlan <VLAN-LIST> response-time <5-20>
no ipv6 mld snooping vlan <VLAN-LIST> response-time
ipv6 mld snooping vlan <VLAN-LIST> robustness-variable <1-7>
no ipv6 mld snooping vlan <VLAN-LIST> robustness-variable
Parameter:
login
VLAN-LIST
last-member-query-
Add/Edit login authentication list
Specify VLAN ID list to set
Specify last member query count to set. Default is 2
Command Guide of WGSW-28040
222