Qos Trust; Command Guide Of Wgsw - Planet WGSW-28040 Command Manual

Switch# show qos
QoS Mode: basic
Basic trust: cos

4.21.2 qos trust

Command:
qos trust (cos | cos-dscp | dscp | precedence)
Parameter:
cos
cos-dscp
dscp
precedence
Default:
Default qos basic mode trust type is cos.
Mode:
Global Configuration
Usage Guide:
In QoS basic mode, there are 4 trust types for device to judge the appropriate queue of the packets. This command is
able to switch between these trust types.
CoS:
IEEE 802.1p defined 3bits priority value in vlan tag. Trust this value in packets and assign queue according to
cos-queue map.
DSCP:
IETF RFC2474 defined 6bits priority value in IP packet (highest 6bits in ToS field). Trust this value in packets and
assign queue according to dscp-queue map.
IP Precedence:
The highest 3bits priority value in IP packet ToS field. Trust this value in packets and assign queue according to
precedence-queue map.
Specify the device to trust CoS
Specify the device to trust DSCP for IP packets, and trust CoS for non-IP packets.
Specify the device to trust DSCP
Specify the device to trust IP Precedence

Command Guide of WGSW-28040

258