View System Information; Restore System To Factory Default Settings - Planet POE-1200 User Manual

3.11 View System Information

To view the system information, enter show system . System information such as product
name, software version, hardware version, MAC Address and IP address will show as in
Figure 3-18.
POE2400> show system

3.12 Restore System to Factory Default Settings

The command factory reset
default values. The default port priority value is 0 (highest) and the default port power
management value is enable .
POE2400> factory reset

Note:
Figure 3-19 View system information screen
will reset port priority and port power management to
The reest command is the same to the reset button. Hold
the reset button for 5 seconds and the system will set back
to default as like the command above.
17