Battery Operating Time; Low Battery Notification - Polar Electro M600 User Manual

1. Wrist-based heart rate monitor sensors
2. Charging port
When you've finished charging the battery of your M600, remove the charging cable from the USB port of your
computer or from the wall adapter. If the charging cable is left connected to a power source, the magnetic end of the
cable attracts iron-containing objects and can short-circuit, possibly causing circuit damage, overheating, fire or explo-
sion.
Don't leave the battery fully discharged for a long period of time or keep it fully charged all the time because it may
affect the battery life time. Also, do not charge the battery in temperatures under 0°C or over +40°C or when the char-
ging port is wet or sweaty. If the charging port of your M600 has gotten wet, let it dry before plugging in the charging
cable.

BATTERY OPERATING TIME

The battery operating time is
•
2 days / 8 hours of training on M600 paired with an Android phone.
•
1,5 days / 8 hours of training on M600 paired with an iPhone.
The operating time depends on many factors, such as the temperature of the environment in which you use your
M600, the features you use, if the screen is in the Always-on mode, and battery aging. The operating time is sig-
nificantly reduced in temperatures well below freezing. Wearing the M600 under your overcoat helps to keep it warmer
and to increase the operating time.

LOW BATTERY NOTIFICATION

When the charge in your M600's battery drops down to 15% or less, you'll see a notification stating the charge level
and the status of battery saver mode. You can tap the notification to Turn on/off battery saver. The battery saver
mode will automatically turn on when the battery charge level hits 5%.
Since the GPS recording is NOT on in the battery saver mode, you'll get a notification if the battery saver mode is on
when you're about to start training with the Polar app or if the battery falls below 5% while you're training.
15