Making Copies
Other Features
■ Job Memory
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.
Set up the copy
job to be stored.
NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to "Off"
in the Copier Settings "16 Double
Exposure". (See page 59)
■ Double Exposure
From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image). ∗
Original Size:
Copy Size: Letter-R
ex. Invoice-R
ABC
ABC
NOTE:
When opening the Platen Cover or optional ADF
● An incorrect position detection of the original may
occur when a strong light shines on the glass during
this mode.
● An incorrect exposure may occur when there is a
black line at the edge of the original or an image
which the machine interprets as a black pattern in
this mode.
● The final copy may be affected if colored background
original(s) do not have a white edge or if it is less
than 2 mm wide.
● JOB MEMORY mode will not be deleted even if the power switches are turned Off.
NOTE
● When storing a new job into a programmed memory location, the previously stored job will be
● M1, M2 can use as manual skyshot mode by setting user function mode.
52
To store a job in memory
1
1
1
Front Side
Original Guide
Image
DEF
Back Side
Image
5
overwritten and erased.
2
• Front Side of Original
• Original Size:
Free, maximum Invoice size
• Opening the ADF
• Fit original to the Original
Guide.
6
Back Side
of Original
∗
1 When selecting the Double Exposure, it will be
displayed as "2 in 1" at Job Settings, and "N in 1"
of Function Select Key will also be displayed.
∗
2 Double Exposure function set by M5 key is unable
to store with other Job Memory.
2
M1, M2, M3, M4, M5
∗
2