Panasonic KX-TDA100 Features Manual page 28

1.1 Incoming Call Features
*: This is applied only when the call does not reach the DISA line (e.g., busy), in other words,
when it does not reach the destination (e.g., extension) by using the DISA feature. Once
the call reaches the destination by using the DISA feature, the Intercept Routing feature
of the destination works.
Each of them can have different intercept destinations for each time mode (day/lunch/break/
night).
[Available Intercept Destination]
Wired Extension (PT/SLT/ISDN Extension/T1-OPX)
Digital Wireless Extension (DWX)
Incoming Call Distribution Group
DWX Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Trunk Access no. + Phone no.
Trunk Group Access no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Conditions
• Intercept Routing—Busy/DND on/off
Each Intercept Routing—Busy and Intercept Routing—DND can be enabled or disabled
through system programming.
If disabled, one of the following is activated depending on the trunk card type which a call
arrives through:
a)
b)
• If the intercept destination cannot receive the call:
a)
b)
28 Feature Guide
Intercept Destination
LCOT or T1 (L-CO/G-CO) Card: The call will be sent back to the original destination.
Other Trunk Cards: Busy tone will be sent to the caller.
Intercept Routing—No answer: Intercept timer will restart at the original
destination, until the call is answered.
Intercept Routing—Busy/DND: The call will be sent back to the original destination
when the call arrives through the LCOT or T1 (L-CO/G-CO) Card. When the call
arrives through other trunk cards the caller will hear busy tone.
Availability