Charge Metre - Panasonic KX-TDA100 Features Manual

1.23 Administrative Information Output Features

1.23.2 Charge Metre

Description
The PBX receives a call charge signal during or after a conversation with an outside party.
The call charge information is shown on the telephone display and the SMDR.
1.
Call Charge Signal Service
Call charge signal service from the telephone company depends on the trunk being used.
Analogue trunk
ISDN line
E1 line
*: When the pay tone service is used, pay tone type (12 kHz/16 kHz) should be
2.
Call Charge Display
– Up to 7 digits (e.g., 88888.75)
– The decimal point position (the number of significant decimal digits) for currency is
programmable. (
– Up to 3 currency characters are programmable.
(e.g., EUR or
– The currency position either front or back of the call charge is programmable.
(e.g.,
3.
Margin/Tax Rate Assignment
It is possible to add a margin (
charges. The call charge rate per meter indication is programmable on a trunk group
basis (
[Calculation Method]
The margin or tax rate must be xx.xx % (whole number part: two digits, decimal fraction:
two digits). A calculation method depends on the information which is sent from the
telephone company; meter indication or charge.
a)
b)
The calculation result is rounded up to the least significant decimal digit.
4.
Total Call Charge
– A PT user can show the total call charges on the display.
– The call charge is totalled on an extension, trunk, or verified code basis.
206 Feature Guide
Trunk
Pay Tone* (CID/Pay Card is required.)
Advice of Charge (AOC)
Metre Pulse
selected ( Pay Tone Signal Type).
Decimal Point for Currency)
for Euro) (
45.12 or 45.12
Charge Rate per Unit).
Call charge with tax and margin in meter indication:
[Meter indication received from the telephone company]
[1 – Tax Rate]
Call charge with tax and margin in charge:
[Charge received from the telephone company]
[1 – Tax Rate] [1 – Margin Rate]
Service
Currency).
)
Charge Margin) and the tax (
[1 – Margin Rate]
Charge Tax) to the call
[Call Charge Rate]