Panasonic KX-TDA100 Features Manual page 179

[Explanation]
Number in
the table
(1)
(2)
(3)
(4)
(5)
Conditions
• Hardware Requirement: an optional E1 Card
• If an E1 line is used as a trunk, the channel type depends on the contract with the
telephone company.
Feature
TIE Line Service Refer to the TIE Line Service feature. (
Service)
Direct Inward Refer to the DID feature. (
Dialling (DID) Direct Dialling Inward (DDI) in Section 1.1.1 Incoming
Trunk Call Features—SUMMARY)
Direct In Line Refer to the DIL feature. (
(DIL) 1.1.1 Incoming Trunk Call Features—SUMMARY)
Automatic Outgoing ANI:
Number Sends the caller's number to the E1 line. The sending
Identification method is the same as ISDN CLIP service. (
(ANI) Connected Line Identification Presentation (CLIP/COLP)
in Section 1.18.1 Integrated Services Digital Network
(ISDN)—SUMMARY)
Incoming ANI:
Receives the caller's number from the E1 line.
When the ANI number is received, it can be treated the
same as a Caller ID number. (
Call Charge The call charge meter pulses can be received during a
Information conversation. (
1.19 E1 Line Service Features
Description
Direct Inward Dialling (DID)/
Direct In Line (DIL) in Section
1.15.1 Caller ID)
1.23.2 Charge Metre)
Feature Guide
1.26.1 TIE Line
Calling/
179