Group - Panasonic KX-TDA100 Features Manual

2.2 System Configuration—Software

2.2.2 Group

Description
This PBX supports various types of groups.
1.
Trunk Group
Trunks can be grouped into a specified number of trunk groups (e.g., for each carrier,
trunk type, etc.) (
basis. All trunks belonging to a trunk group follow the assignment determined for that
trunk group.
One trunk can belong to only one trunk group on a port or channel basis.
Port basis: LCOT/DID/E & M/ISDN-BRI/ISDN-PRI23/ISDN-PRI30
Channel basis: E1/T1
2.
Extension Group
The PBX supports extension groups (
used to compose the following groups:
a)
b)
c)
Every extension must belong to one extension group, but cannot belong to more than one
extension group.
Assignable Extensions: PT/SLT/DWX/ISDN Extension/T1-OPX
[Example]
Extension Group 1
Extn. 100 Extn. 101
2.1 Call Pickup Group (
244 Feature Guide
Trunk Group). Several settings can be assigned on a trunk group
Tenant ( 2.2.3 Tenant Service)
Call Pickup Group (See below.)
Paging Group (See below.)
Extension Group 2
Extn. 102 Extn. 103
Using the Group Call Pickup feature, extensions can answer any calls within a
specified group. One extension group can belong to several call pickup groups.
( Call Pickup in Section 1.4.1 Answering Features—SUMMARY)
[Example]
Call Pickup Group 1
Extension Group 1
Extn. 100 Extn. 101
Extension Group Assignment), each of which is
Extension Group 3
Extn. 104 Extn. 105
Pickup Group for Extension Group)
Call Pickup Group 2
Extension Group 2 Extension Group 3
Extn. 102 Extn. 103 Extn. 104 Extn. 105
Extension Group 4
Extn. 106 Extn. 107
Call Pickup Group 3
Extension Group 4
Extn. 106 Extn. 107