Panasonic KX-TDA100 Features Manual page 181

Number in
the Table
(4)
(5)
Conditions
• Hardware Requirement: an optional T1 Card
• If a T1 line is used as a trunk, the channel type depends on the contract with the telephone
company.
• For the TIE (E & M) channel type, it is programmable whether the PBX sends a dial tone
to extensions when a trunk is seized on a trunk basis.
Feature
Off Premise An SLT which is installed off site can perform as if it were
Extension installed locally. The SLT makes and receives a call
(OPX) through the PBX. An extension number can be given to
the OPX, and extension data such as COS is also
applied.
When incoming calls reach the OPX, the ringing pattern
is the same as the pattern for an SLT installed directly
into the PBX.
[Example]
Automatic Receives the caller's number from the T1 line.
Number When the ANI number is received, it can be treated the
Identification same as a Caller ID number. (
(ANI)
1.20 T1 Line Service Features
Description
Telephone Company
T1-LCO T1-OPX
T1 Card
PBX
Extn.101 Extn.102
1.15.1 Caller ID)
SLT
Extn.103
Dials "103".
Feature Guide 181