Led Indication - Panasonic KX-TDA100 Features Manual

1.17 Proprietary Telephone (PT) Features

1.17.3 LED Indication

Description
The light (LED: Light Emitted Diode) of the Message/Ringer Lamp and following buttons (Line
Status Buttons and Corresponding Extension Status Button) show line conditions with a
variety of light patterns.
Line Status Buttons: S-CO, G-CO, L-CO, INTERCOM, G-DN
Corresponding Extension Status Button: DSS
1.
Light Pattern of the Message/Ringer Lamp
•
•
•
•
2.
Light Pattern of the Line Status Buttons
Light
Pattern
Off
Green on
Slow green
flashing
Moderate
green
flashing
Rapid green
flashing
Red on
Slow red
flashing
Rapid red
flashing
158 Feature Guide
Incoming call from a trunk: Red flashing
Incoming call from another extension: Green flashing
Message(s) present (no incoming call): Red on
No Message(s) present (no incoming call): Off
Line Status
Button:
S-CO
This extension is holding the line using Exclusive Hold
or using the line for an Unattended Conference.
Incoming
call/Privacy
Release
Incoming
call for
another
extension/
Another
extension
is using the
line/Another
extension
has the line
on Exclusive
Hold.
Another
extension
is holding
the line.
Incoming call to the incoming call
distribution group in Ring
distribution method
Trunk Status
G-CO L-CO
Idle
This extension is using the line.
This extension is holding the line.
Incoming call
–
Other
extensions
are using
all trunks
in the trunk
group.
– –
Incoming Call
Intercom
Distribution
Group Line
Line Status
Status
INTERCOM G-DN
–
This extension
is logged out
of the incoming
call distribution
group.
– –
–
–