Automatic Setup - Panasonic KX-TDA100 Features Manual

2.3.3 Automatic Setup

Description
There are two automatic setup features as follows:
1) Automatic ISDN Configuration
2) Automatic Time Adjustment
1.
Automatic ISDN Configuration
The ISDN (BRI) port configuration can be set automatically (
Configuration).
The following items will be set by making and receiving a call using the subscriber number
assigned for each ISDN (BRI) port:
a)
b)
c)
d)
2.
Automatic Time Adjustment
It is possible to adjust the PBX clock automatically in the following two ways:
a)
b)
Conditions
• SMDR will record the call information using the PBX clock so that the recording time will
be overlapped at the end of summer time.
L1 Active Mode
L2 Data Link Mode
Access Mode (Point-to Point/Point-to-Multipoint)
TEI Assignment Mode (Fix 00-63/Automatic)
Summer Time (Daylight Saving Time) Setting:
The start and end dates of the summer time can be programmed. The PBX clock will
be adjusted (one hour forward or backward) at 3:05AM of the programmed date, if
enabled through system programming. It means 3:05 AM will become 4:05 AM on
the start date of the summer time, and 3:05 AM will become 2:05 AM on the end date.
Note
If the Timed Reminder (Wake-up call) is set;
– On the summer time start date, the setting between 3:05 AM and 4:05 AM will
not happen.
– On the summer time end date, the setting between 2:05 AM and 3:05 AM will
ring twice.
Time Information from Telephone Company:
Time information can be received on the following calls:
• An incoming call through an ISDN line
• An incoming call through an analogue line with Caller ID which includes
the time information.
The PBX clock will be adjusted everyday when the first call after 3:05AM is received,
if enabled through system programming.
Note
If the Timed Reminder (Wake-up call) is set, the setting will not happen or will ring
twice depending on the adjustment.
2.3 System Data Control
BRI Automatic
Feature Guide 259