Panasonic KX-TDA100 Features Manual page 283

Configuration–Slot–OPB3
Parameter Description
Slot Refers to the slot no.
(Display only)
Location Refers to the optional
port position.
(Display only)
Feature Specifies the option
Card Type card type.
Status Refers to the status
of the card. (Display
only)
Command Specifies the
operating card
command.
Doorphone No. (1–4)
Port Refers to the port no.
(Display only)
Value Range
PBX No.–Slot
No.
(OPB3
designates the
number.)
1–3
None/MSG4/ None (No cards)
DPH4/DPH2/
MSG4 (4-Channel Message Card)
EIO4/ECHO16
DPH4 (4-Port Doorphone Card)
DPH2 (2-Port Doorphone Card)
EIO4 (4-Port External Input/Output Card)
ECHO16 (16-Channel Echo Canceller Card)
INS/OUS/Fault/ INS
Fault-OVER/
OUS
Fault-DIF
Fault
Fault-
OVER
Fault-DIF
Blank/Delete/ Delete
INS/OUS
INS
OUS
Automatic
setting/1–16
3.2 PC Programming
Note
The card is in service.
The card is out of service.
Card was pulled out from the slot or the
card is not communicating with the
system.
The number of trunk and/or extension
ports exceeds the system capacity.
The card is different from the card
specified in programming.
Card has been removed from the
system.
It performs Automatic Configuration of
the card, if the slot is in the "OUS"
condition.
Operation is suspended.
(If the port is on-hook, the port is
disabled. Otherwise the system will wait
until the port becomes idle.)
Feature Guide 283