Air Brake - FUTABA T6K-V2 Instruction Manual

AIR BRK
Function
This function is used when the air brake is
necessary during landing and is turned on and off
by switch D (initial setting).
(Example)
Switch C
● Adjustment item for every wing type
Display 1AIL1FLP
AIL1(1CH) -----
ELEV(2CH) Elevator
FLAP(5CH) Flap
AIL6(6CH) -----
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
Activating the function
Elevator delay rate set
● Select the setting item
with the Jog key.
114

Air brake

2AIL 2AIL1FLP
Aileron1 Aileron1
Elevator Elevator
----- Flap
Aileron6 Aileron6
② Select
（1 second）
Rate set
● When the LINR operation mode was selected, the current throttle stick position is displayed
at the operation reference point and in the bottom row parentheses.
WING TYPE 1AIL
Flap down
WING type 1AIL1FLP or
5CH
Ailerons up
WING type 2AIL or
2AIL1FLP
ELEVON
-----
Elevator
Flap
-----
"AIR BRK"
from the menu with the
Jog key.
(AIRPLANE)
1AIL1FLP 2AIL 2AIL1FLP ELEVON
*When using a flap here, make
CH5(FLAP) NUL in AUX CH.
2AIL1FLP
6CH
③ Open the setting screen by
pressing the Jog key.
3CH Control set (LINR mode)
● When not using this Function
select INH. The display of On/
Off is shown when active and
assigned to a switch.
Switch selection
Switch direction
Mode
1CH