Aileron - Camber Mixing - FUTABA T6K-V2 Instruction Manual

Aileron → Camber mixing
AL → CMB
Function
This mixing links the camber flaps with aileron
operation (stick). It is used when you want to in-
crease roll axis maneuverability.
OFF
ON
Set switch to ON
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Mixing rate
Activating the function
● Select the setting item
with the Jog key.
3
Position Switch
NULL UP UP&DWN
ON ON
ON
ON OFF OFF
ON OFF ON
2
Position Switch
NULL UP DOWN
ON OFF
ON
ON OFF ON
AIL → Camber mixing
■ Activating the function
① Select the "MIX" item and then select
the "ON" by pressing the + key or ‒
key.
＋
or
● When you do not use a function, set
to the "INH" side.
WING TYPE
Ailerons operation
② Select
from the menu with the
Jog key.
UP&CNT CENTER CNT&DN DOWN
ON OFF OFF OFF
ON
ON ON OFF
OFF
OFF ON ON
■ Mixing rate
② Select the value item and then
−
1AIL 1AIL1FLP
"AL → CMB"
adjust the mixing rate by press-
ing the + key or ‒ key.
Range：-120 to +120%
Default：0%
● When you want to return the set value to the initial value,
press the + key and ‒ key simultaneously.
(GLIDER)
2AIL 2AIL1FLP 2AIL2FLP
Flaps and ailerons
operate
Roll is corrected by using
the ailerons to control the
camber FLP.
③ Open the setting screen by
pressing the Jog key.
● When not using this function,
select INH.
● When condition was used, the dis-
play can be switched and each
connection can be set by switch-
ing the condition switch.
● The ON/OFF switch can be changed.
( S e l e c t e d w i t h t h e J o g k e y a n d
changed with the +key)
● Sets the ON/OFF direction of the se-
lected switch.
＋
or
−
155