Butterfly Mixing - FUTABA T6K-V2 Instruction Manual

BUTFLY
Function
This function is utilized to quickly slow the
aircraft and reduce altitude by simultaneously
raising the left and right ailerons and lowering the
Butterfly (Crow) produces an extremely
the following:
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
Amount of movement setting
● Aileron
● Flap
● Elevator
● When condition is used, the display
can be switched and each connection
can be set by switching the condition
switch.
● Offset setting ‒Select "OFST" XX%.
At THR stick high
At THR stick 60%
150
Butterfly mixing
OFF
ON
Switch set to ON THR stick lowered
② Select
（1 second）
● It can't be set.
＜ It's caused by the
wing type. ＞
（Currently selected condition）
Brake amount
OFST ▶ 100%
press the Jog key for 1 second
Brake amount
OFST ▶60%
press the Jog key for 1 second
WING TYPE 1AIL
Fine tuning of an elevator
"BUTFLY"
from the menu with the
Jog key.
● Butterfly : ACT/INH
MAX
High Slow
THR stick operation
MAX
Start from
60%
High Slow
THR stick operation
1AIL1FLP 2AIL 2AIL1FLP 2AIL2FLP
Resistance increased by raising
the elevators and lowering the
flaps
③ Open the setting screen by
pressing the Jog key.
● When MIX is set to ACT, the amount of MIX(s)
according to stick operation is displayed.
● Can be either
● Current THR stick position
0％ : Low 100％ : High
● Select the setting item
with the Jog key.
＋
● The value is changed by
+ key or ‒ key.
● When offset is set below a center, the
mixing of THR stick operates by the high
side.
(GLIDER)
set to a switch
or when NULL
is controlled
b y t h e T H R
stick.
−