Date reset
① Select the RES item and then press the Jog key
for 1 second.
● Confirmation message "sure?" blinks.
For safety, a double setting system is used. When a change is cancelled after the confirmation message
is displayed, the change is not made when moved to another setting item by Jog key.
CAUTION
Throttle Reverse
Only the throttle channel (CH3) initial setting is REV (reverse). Thoroughly check the
Hi and Low directions of the engine or motor used and be careful that they do not
suddenly run at full speed. Even after data reset, CH3 is reversed.
Model copy
① Select the COPY item and the select
the model number of the copy des-
tination by pressing the + key or ‒
key.
+
or
Selection range:1-30
For safety, a double setting system is used. When a change is cancelled after the confirmation message is
displayed, the change is not made when moved to another setting item by Jog key.
MDL SEL PAGE 2
54
(1 second)
② Press the Jog key for 1 sec-
ond.
−
● Confirmation message
"sure?" blinks.
② Date reset by pressing the Jog key.
● A c o n f i r m a t i o n " b e e p " s o u n d s a n d
"Complete" is displayed on the screen is
complete.
③ Copy the model by pressing the
(1 second)
● A c o n f i r m a t i o n " b e e p "
Jog key.
s o u n d s a n d "Complete"
is displayed on the screen
t o s h o w t h a t c o p y i n g i s
complete.
● Original data : Model type
Model name
● Copy place : Model type Model
name