Voltage: Display Of Sbs-01V (Option), And Alarm Setup - FUTABA T6K-V2 Instruction Manual

VOLTAGE : Display of SBS-01V (Option), and alarm setup
the voltage information from an optional voltage
sensor.
known.
ALARM set : Down side
*When the + - keys are pressed simultaneously, the rate is reset
to the initial value.
*A voltage sensor must be installed in the aircraft.
● Conversion of a display unit is performed by "TLM UNIT" of
OFF
ON
2 Position
"PARAMETER".
If the following types are selected, the
transmitter will vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
OFF
OFF
ON
3 Position
"VIB" type
89