Ext-Volt - FUTABA T6K-V2 Instruction Manual

EXT-VOLT

When connected as shown in the figure, the voltage of the drive battery in the aircraft and another
power supply battery can be displayed at the T6K.
● R3008SB Receiver, CA-RVIN-700 (external voltage input cable sold separately) is necessary.
● Soldered wiring work is necessary.
● EXT-Voltage display
When connected as shown in the figure, the drive battery voltage is displayed at the transmitter.
Method
Calling the SENSOR screen
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
（1 second）
EXT start
① In the SENSOR screen state, select
"EXT ▶ OFF " from the menu with
the Jog key.
(Sold separately)
"SENSOR"
② Select
from the menu with the Jog
key.
② Select the "R3008SB" by
pressing the + key or ‒ key.
＋ −
or
③ Open the setting screen by
pressing the Jog key.
SENSOR Screen
79