Disconnection During Status Sending After Print Data Reception - SATO CL4NX Programming Reference Manual

7.7.3 Disconnection during status sending after print data
7.7.3.1
When CRC check is enabled (common to Status 3 and 4)
CONNECT
Print command (STX-ETX CRC)
×
[Note]
1. When there is no ACK returned, stop the transmission as it appears that some sort of communication
interference is occurring.
2. ACK return may be lost when Bluetooth is disconnected before the printer returning ACK.
7.7.3.2
When CRC check is disabled (common to Status 3 and 3,4)
The printer operation is the same as 7.7.3.1 when CRC check is enabled.
ID number = [12]
Print q'ty = 50
Job name = [SATO]
ACK
Disconnected
or communication failure
Receive/Analysis/Edit
Print operation
576
reception