Esc+K5 40X40 Dots Kanji In Vertical Line - SATO CL4NX Programming Reference Manual

8.37 Font
40x40 dots Kanji
8.37

ESC+k5 40x40 dots Kanji in Vertical Line

in Vertical Line
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies 40x40 (width x height) dot vertical written Kanji character print
[Format]
<k5>an~n
● Parameter
a[Kanji selection mode]
n [Data]
[Coding example 1] Shift JIS HEX code characters, Horizontal magnification: 3, Vertical magnification: 5
<A>
<V>100<H>200<P>2<L>0305
<k5>H81698A94816A83548367815B
<Q>2
<Z>
[Coding example 2] JIS binary code, Horizontal magnification: 2, Vertical magnification: 3
<A>
<V>100<H>200<P>2<L>0203
<k5>B！ J3T！ K%5%H！<
<Q>2
<Z>
[Supplementary Explanation]
1. HEX characters
2. Binary code
3. Smoothing function validity range
4. Highlighting function validity range
5. Print result of two bytes under bar "_" is vertical line.
[Notes]
1. With the highlighting function the character width enlarges proportional with the expansion factor.
2. Using the highlighting function, in some cases, depending on the type of font, characters become squeezed.
3. When the Kanji mode setting is [Japan, Compatible Kanji] or [China, Simplified Chinese (GB18030)] or [China,
Traditional Chinese (BIG5)] or [Korean (KSX1001)], it will be a command error.
[Valid Command]
Print position <V>
Modification
<P>
k5 Parameter
<6B> 35> an~n
16< 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= H: HEX character
B: Binary code
I: HEX character letters, smoothing function
C: Binary code, smoothing function
J: HEX character letters, highlight function
D: Binary code, highlight function
K: HEX character letters, smoothing and highlight function
E: Binary character letters, smoothing and highlight function
= Refer to the code table (JIS, Shift JIS, Unicode).
= Chinese Code 4bytes ASCII / 1 Chinese character
= Chinese Code 2bytes / 1 Chinese character
= Horizontal/vertical valid range:
= Horizontal/vertical valid range:
<H>
<L> <%> <&>
108
ESC+k5
factor 3 to 12
factor 1 to 5
<WD>
</> <0>