Esc+K9 24X24 Dots Kanji In Horizontal Line With 1-Byte Character - SATO CL4NX Programming Reference Manual

8.29 Font
8.29
24x24 dots Kanji in Horizontal Line ESC+K9 24x24 dots Kanji in Horizontal Line
with 1-byte Character with 1-byte Character
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies 24x24 (width x height) dot horizontal written kanji character print and W12 x H24 dots half size character in
horizontal line.
[Format]
<K9>an~n
● Parameter
a [Chinese selection mode]
n [Data]
[Coding example] Shift JIS HEX code characters, Data: 株式会社ｻﾄ-
<A>
<V>100<H>200<P>2<L>0305
<K9>H8A948EAE89EF8ED0BBC4B0
<Q>2
<Z>
[Supplementary Explanation]
1. HEX characters
2. Binary code
3. Smoothing function validity range
4. Highlighting function validity range
[Notes]
1. With the highlighting function the character width enlarges proportional with the expansion factor.
2. Using the highlighting function, in some cases, depending on the type of font, characters become squeezed.
3. This command is only available for Shift JIS kanji code and Unicode.
4. For the half size character (one byte character code), printing will be performed in W12 x H24 dots.
5. For the full size character (two byte character code), printing will be performed in W24 x H24 dots.
[Valid Command]
<V>
Print position
Modification
<P>
K9 Parameter
<4B> <39> an~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= H: HEX character
B: Binary code
I: HEX character letters, smoothing function
C: Binary code, smoothing function
J: HEX character letters, highlight function
D: Binary code, highlight function
K: HEX character letters, smoothing and highlight function
E: Binary character letters, smoothing and highlight function
= Refer to the code table (Shift JIS, Unicode).
= Kanji Code 4 bytes ASCII / 1 Kanji character
= Kanji Code 2bytes / 1 Kanji character
= Horizontal/vertical valid range:
= Horizontal/vertical valid range:
<H>
<L> <%> <&>
100
ESC+K9
factor 3 to 12
factor 1 to 5
<WD>
</> <0>