Esc+Tu Printing Tag Data (Felica) - SATO CL4NX Programming Reference Manual

16.14 RFID
16.14

ESC+TU Printing Tag Data (FeliCa)

Printing tag data
(FeliCa)
Command
ESC
HEX code
<1B>16
Default Value
Nil
When turning off the power switch
Valid range and
Valid range within item
term of
command
Valid range between items
[Function]
Reads 16-digit hexadecimal numeric sequence from Felica Lite, FeliCa Lite-S tag and renders to the specified
direction to make it possible to print on label.
[Format]
<TU>a(,n～n)
●Parameters
a = To use this functionality or not
n = ID that is converted to IDm in the data area of each command for the ID in use (only when a=1).
Character size: 4-16 bytes
Character type: Any (alphanumeric)
(All parameters should be in the ASCII format)
TU Parameter
<54>16<55>16 a(,n～n)
The set command is not maintained.
The set parameter is in effect until a new specification is
made.
The set parameter becomes invalid.
1：Read IDm data and start using
0：Cancel use
394
ESC+TU