Sending Pdf Data To Printer - SATO CL4NX User Manual

Sending PDF Data to Printer

You need to set up the connection between your source (i.e. core IT system, PC application, mobile
device, cloud, etc.) and the printer via the supported connectivity. The available interfaces (LAN,
WLAN, USB, RS-232C, IEEE 1284 and others) are depending on the printer.
Supported Print Data
• The Direct Print function enables you to print documents and graphic data without using printer
commands such as SBPL commands. The supported document format is PDF.
• Make sure that the font data is embedded in the PDF file. Otherwise, the data might not be
printed correctly due to the printer will substitute the original font with its internal font.
• Do not use outlined PDF data as this will result in larger file size. Recommended using PDF data
(ISO 32000-1) that is not outlined.
• The maximum available file size that can be sent depends on the printer's memory. The
recommended PDF file size is less than 50 MB.
15