Esc+Pi Pcx File Registration - SATO CL4NX Programming Reference Manual

14.16 Memory Card
14.16

ESC+PI PCX File Registration

PCX File Registration
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
Valid range within items
term of command
Valid range between items
[Function]
Specifying the registration of PCX file created by such as Paint Brush of Windows.
[Format]
<PI>aaa,bbbbb,n~n
●Parameter
a [Registration number]
b [Total bytes of PCX file]
*Specify the file size of PCX file for total bytes.
n [Data]
* Data is sent as binary data (Outputs 8 bits as one character data all at once)
[Coding Example]
<A>
<CC>1
<PI>001,12345,n~n
<Z>
[Supplementary Explanation]
1. Data is sent as binary data (Outputs 8 bits as one font data all at once) (Total bytes are PCX file size and Data are PCX file
data)
2. In PCX file, 128 bytes of data is for the header part and the rest of data is for the image data.
3. When [Total bytes of PCX file] is not matching the transfer data, this may become the cause of malfunction.
4. Total bytes are the file size displayed at [Property] and such.
5. PCX file is available in Black/White mode only. In color mode, printing will not be performed due to command
error. Also, this command is not valid for PCX compressed file. Make sure that the file extension is set to [PCX]
before printing.
6. Specify Card Slot for Use <CC> prior to this command<PI> when using.
7. The error occurs when specifying unused or specifying the slot which the printer is allocated.
[Note]
Don't power off while accessing the memory. There is no guarantee of data in media if the power is turned off while
accessing the memory.
PI
<50> <49>
16 16
= Valid Range
= Valid Range
= PCX file data
299
ESC+PI
Parameter
aaa,bbbbb,n~n
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
: 1 to 999
: 1 to 99999