Esc+K8 16X16 Dots Kanji In Vertical Line With 1-Byte Character - SATO CL4NX Programming Reference Manual

8.38 Font
8.38
16x16 dots Kanji in Vertical Line ESC+k8 16x16 dots Kanji in Vertical Line
with 1-byte Character with 1-byte Character
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying to print the mixture text of W16 x H16 dots Kanji and W8 x H16 dots half size character in vertical line.
[Format]
<k8>an~n
● Parameter
a[Kanji selection mode]
n [Data]
Shift JIS HEX code characters, Data: 株式会社ｻﾄ-
[Coding example]
<A>
<V>100<H>200<P>2<L>0305
<k8>H8A948EAE89EF8ED0BBC4B0
<Q>2
<Z>
[Supplementary Explanation]
1. HEX characters
2. Binary code
3. Smoothing function validity range
4. Highlighting function validity range
5. Print result of two bytes under bar "_" is vertical line. (Excluding when the kanji mode is [Japan, Compatible kanji])
[Notes]
1. With the highlighting function, the character width enlarges proportional with the expansion factor.
2. Using the highlighting function, in some cases, depending on the type of font, characters become squeezed.
3. This command is valid for Shift JIS Kanji code or Unicode.
4. For the half size character specification (1-byte character code), printing will be performed in W8 x H16 dots.
5. For the full size character specification (2-byte character code), printing will be performed in W16 x H16 dots.
[Attention]
When half-sized character with voiced/P-sound consonant mark is specified, each part of character appears as a
single character.
e.g.) When the word "ﾊﾞｰ" is specified, it will be written separately such as " ﾊ ", " ﾞ ", " ｰ ".
[Valid Command]
Print position <V>
Modification
<P>
k8 Parameter
<6B> <38> an~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= H: HEX character
B: Binary code
I: HEX character letters, smoothing function
C: Binary code, smoothing function
J: HEX character letters, highlight function
D: Binary code, highlight function
K: HEX character letters, smoothing and highlight function
E: Binary character letters, smoothing and highlight function
=Refer to the code table (Shift JIS, Unicode).
= Chinese Code 4bytes ASCII / 1 Chinese character
= Chinese Code 2bytes / 1 Chinese character
= Horizontal/vertical valid range:
= Horizontal/vertical valid range:
ﾊ
ﾞ
ｰ
<H>
<L> <%> <&>
109
ESC+k8
factor 3 to 12
factor 1 to 5
<WD>
</> <0>