Esc+Id Job Id Number - SATO CL4NX Programming Reference Manual

5.4 Control
5.4

ESC+ID Job ID Number

Job ID Number
ESC
Hexadecimal
<1B>
16
code
Initial value a=<20>
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying job ID number for status return.
[Format]
<ID>aa
<ID>aaaaa
●Parameter
a[Job ID number] =
[Coding Example] Job ID number: 01
<A>
<ID>01
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<Q>2
<Z>
[Supplementary Explanation]
1. When status return is used for interface protocol, the specified job ID No. can be set to the telegraphic status.
2. Status can be confirmed sending status request (ENQ).
3. Include this command within items and use between start code <A> and stop code <Z>.
4. When Status 5 is used, the valid range of job ID becomes "00000 to 99999" and "*****". If "*****" is specified, the item
will not be managed by Job ID number.
[Notes]
1. In status return interface protocol, this command becomes valid when status request (ENQ) is received while printing
(QTY≠0, includes at the time of Offline and Error).
2. In status return communication protocol, if status request (ENQ) is received when printing is not in progress (QTY=0,
No received data when power is ON), space (20H) will be set to status and returned.
3. When Job ID Number <ID> is used more than twice within the items of <A> and <Z>, the last specified value
becomes valid.
ID
<49> <44>
16 16
16
Valid range: 00 to 99
****** or00000 to 99999
ESC+ID
Parameter
aa
aaaaa
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set command becomes invalid.
(2digits)
(5digits)
13