Dc2+Df File Name Information Acquisition - SATO CL4NX Programming Reference Manual

17.21
Common Commands
for All Languages
17.21 File Name Information
DC2+DF
Acquisition Acquisition
Command DC2
HEX code <12>
16
Default Value None
When turning off the power switch
Valid range
Valid range and
term of Printer operation in progress
command
Error
[Function]
This command returns a list of file names of the specified folder.
[Format]
[DC2]DF,aa,b
[Parameters]
Symbol Parameter
name
Language
a
File type
b
[Return data format (normal, data exists)]
[STX]a...a,b...b(,c...c)[ETX]
Data example) [STX]xxxx,SBPL_001.dfl, SBPL_002.dfl[ETX]
Symbol Parameter name
Total number of data byte
*This is the total number of bytes after parameter b.
a
The delimiting comma between parameters a and b, and the
ETX are not included.
b(c) File name
[Return data format (normal, no file)]
[STX]0[ETX]
[Return data format (when a command error occurs)]
[NAK]<15>
16
File Name Information
DF Parameter
<44> <46> ,aa,b
16 16
The command cannot be received during the printer
operation. ([NAK] return)
Commands can be received even if an error is occurring.
Valid range
SB: SBPL settings
SZ: SZPL settings
SI: SIPL settings
SD: SDPL settings
ST: STCL settings
CA: Common settings (when specifying other than font logo
and TrueType fonts)
0: Font/logo
1: True Type font
2: Wireless LAN certificate (Wi-Fi Root CA)
3: Wireless LAN certificate (Wi-Fi Private Key)
4: Wireless LAN certificate (Wi-Fi Private Key)
5: Wireless LAN certificate (Wi-Fi EAP_FAST PAC_file)
6: HTTPS certificate
476
DC2+DF
Acquisition
method
Two characters
fixed acquisition
One character
fixed acquisition
Valid range
Data size from the first identifier
until before [ETX]