Removing Motor Guard - KTM 390 ADVENTURE EU 2022 Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.15
68
S04138-10

Removing motor guard

A00706-10
–
Check the chain sliding guard for wear.
»
1
If screw becomes visible in area
ing guard when viewed from above:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screw of the chain sliding guard.
Guideline
Screw, chain
guard
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 61)
–
1
Remove screws .
–
Take off the engine guard.
C
of the chain slid-
M5 7 Nm (5.2 lbf ft)
Loctite ® 243™