Installing The Fork Protector; Removing Motor Guard (Troy Lee Designs); Installing The Motor Guard (Troy Lee Designs) - KTM 250 SX-F 2021 Owner's Manual

11.8

Installing the fork protector

11.9

Removing motor guard (TROY LEE DESIGNS)

11.10

Installing the motor guard (TROY LEE DESIGNS)

–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
S01208-11 tighten screws
Guideline
Remaining screws,
chassis
–
Remove screws
F02589-10
–
Remove screw
F02588-10
–
Position the motor guard on the frame.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
F02588-11
SERVICE WORK ON THE CHASSIS 11
1
.
M6 10 Nm (7.4 lbf ft)
3
.
M6 10 Nm (7.4 lbf ft)
1
.
2
. Take off the motor guard.
1
.
M6 10 Nm (7.4 lbf ft)
53