CDD‐LIVE
Slot the spigot into the top hat fitting on the base of the cabinet;‐
Then attach the upper arm to the top of the cabinet through the central M8 insert from which the M8 screw was removed. Use
wither the M8 handwheel or the M8 x 40mm bolt. Use the spring washer (first) then the plain washer (second) onto whichever
fixing you are using, pass it through the hole in the mounting plate and into the cabinet insert. Tighten it sufficiently to make
handling easy but allow for final adjustment.
Finally replace the M8 x 70mm bolt in the yoke upper arm to fix it in place and tighten
CDD‐LIVE User Guide V1.0
USER GUIDE
70