Martin Audio CDD-LIVE! Series User Manual page 49

CDD‐LIVE
The window has three sections, the buttons along the top, the graphic display window and the controls on the right of the
window. First we will look at the buttons along the top.
First there are ten parametric EQ buttons plus the high pass filter;‐
As you can see there are a number of colour variations for these buttons. Unused bands are pale blue until they are selected for
editing by clicking on them in which case the colour goes to a brighter blue and the image shows the button depressed. Unused
is defined as the gain left at 0dB. Green buttons indicate a band that has either cut or boost applied, these will go a pale green
when selected. Note that the high pass filter is always active so will always appear green.
The graphic view of the equalisation is a relatively standard frequency response graph;‐
The horizontal axis is frequency in Hertz from 20Hz to 20KHz, the vertical axis is gain from ‐18dB up to +18dB. Colour coding is
also used on the graph to represent the various modes.
CDD‐LIVE User Guide V1.0
USER GUIDE
48