CDD‐LIVE
Cabinet Configuration
The CDD‐Live range is designed to be used in one of three modes, "portrait" or upright either on a speaker stand, distance pole,
wall bracket (CDD‐Live 8 and CDD‐Live 12), yoke or flown using the Universal bracket in conjunction with a scaffold clamp, or
flown using shouldered eye bolts. They can be used in "landscape" mode horizontally using a yoke or universal bracket or eye
bolts and finally as a stage monitor using the multi‐angle cabinet shape. All products are supplied by default in portrait mode,
when used horizontally either flown or as a stage monitor it is vital to rotate the CDD driver to maintain the correct dispersion
for your application.
GRILL REMOVAL
Grilles on CDD Series cabinets are designed to be easy to remove to facilitate driver rotation. No screws are used to hold them
in place; they are manufactured with a natural spring which holds them in place in slots in each side of the cabinets. The grilles
have two or three gaps in the sides depending on the model into which an appropriately‐sized flat‐bladed screwdriver can be
inserted to assist in removal.
Insert the screwdriver blade into one of the gaps ‐ either at the top or bottom of the cabinet (don't start in the middle).
CDD‐LIVE User Guide V1.0
USER GUIDE
23