CDD‐LIVE
Setting up a Dante network is simple — even complex networks can be configured easily and quickly, with all devices discovered
and displayed in the Dante Controller software. Once setup, the computer running Dante Controller can be removed from the
network if desired, with system settings stored in the devices themselves and automatically restored when a device is power‐
cycled.
Switching between XLR analogue inputs to Dante on CDD‐LIVE! enclosures is automatic if a digital stream is present, unless the
user selects the XLR option in VU‐NET. This offers the option of running both Dante digital and analogue simultaneously with the
analogue feed acting as a redundant back‐up to seamlessly take over in the event of a failure in the Dante feed up‐stream of the
CDD‐Live speaker.
CDD‐LIVE User Guide V1.0
USER GUIDE
8