CDD‐LIVE
You will notice that the top left of the main window has your project name and a number of options on the toolbar are now
available.
Device Discovery
The normal method for operating a system following completing the system rigging and connection is to open Vu‐Net and to run
Device Discovery. It is good practice to check your network connectivity, first by using the network icon on the PC task bar which
should show connection to your system (it will flag that there is no internet connectivity which can be ignored). If all is ok you
can proceed by clicking on the Discover Devices button;‐
Assuming everything is OK with your network connection you will see the following window;‐
The meter bar will gradually move across until it is completely green and all devices have been found. This may take a few seconds
on bigger systems with many cabinets.
CDD‐LIVE User Guide V1.0
USER GUIDE
39