CDD‐LIVE
If required attach the scaffold clamp or pole mount adaptor and the cabinet is ready to be used. Once fitted in position the
Handwheel is loosened and the cabinet freely angled up or down, the bracket will slide on the carriage. Once you have
established the desired cabinet angle tighten the Handwheel. The Universal Bracket is asymmetrical and can be used wither way
round. It allows tilt of up to 20° in one direction and 23° in the other.
Fitting the ASF20046 or ASF20048 Universal Bracket
The ASF20046 and ASF20048 Universal Brackets are used with the CDD‐Live 12 and Live 15 respectively. They are identical in
design but scaled accordingly to suit the size of each cabinet. Fitting them is the same for each but is slightly more involved than
the procedure for the CDD‐Live 8.
As with the CDD‐Live 8 the bracket can be fixed on the top, bottom or side of the cabinet, the first step is to remove the screws
at the mounting position once you have decided which orientation you are use. These are the screw mounting positions;‐
The screws that you have removed are no longer required, the bracket MUST be attached with the M8 x 35mm screws supplied
with the Universal Bracket. The screws that are supplied in the cabinet are not long enough and not rated for suspending the
cabinet so will be unsafe.
CDD‐LIVE User Guide V1.0
USER GUIDE
66