CDD‐LIVE
There are dedicated Universal Brackets for each of the CDD‐Live speakers, part numbers are as follows;‐
CDD‐Live 8
CDD‐Live 12
CDD‐Live 15
There is a slight difference in the design and fitting of the CDD‐Live 8 Universal Bracket so we will look at fitting that model first.
Fitting the CDDLUB8B Universal Bracket
The only tool required to fit the Universal Bracket is an M5 Hex (Allen) Key. First remove the two M8 bolts that will be used to fit
the bracket on one of the three possible orientation. These are the screws that need to be removed;‐
Position the universal Bracket and screw in place using the screws removed from the cabinet, ensure that they are fully tightened.
If fitting to the side of the cabinet note that you attach through the central hole in the bracket and the one at the back, fitting to
the top and bottom the holes at the front and back are used, the central hole is not used.
If you are using the universal bracket on the side of the cabinet don't forget to change the orientation of the driver, please see
the chapters on removing the grill and rotating the driver and badge.
CDD‐LIVE User Guide V1.0
USER GUIDE
CDDLUB8B
ASF20046
ASF20048
65