Martin Audio CDD-LIVE! Series User Manual page 59

CDD‐LIVE
Next step is to attach the cabinet section of the bracket to the CDD‐Live. This is the two part section with the collar that mounts
onto the wall section which in turn is hinged to allow vertical adjustment onto the cabinet bracket.
The rear of the cabinet has six countersunk bolts fitted in the amplifier module heatsink designed for use with the mounting
brackets. For portrait mode remove the lower 4 bolts, for landscape mode remove the middle four;‐
Position the bracket over the required holes orientated to suit the orientation that is being used and screw into place tightly
using the bolts supplied with the bracket (note that you cannot use the bolts removed from the heatsink as they are too short).
CDD‐LIVE User Guide V1.0
USER GUIDE
58