Martin Audio CDD-LIVE! Series User Manual page 75

Table of Contents

Advertisement

 
 
 
CDD‐LIVE
CDD‐Live 12 
 
Acoustics
 
TYPE
 
FREQUENCY RESPONSE (1)
 
DRIVER
 
 
INPUT SENSITIVITY
 
MAXIMUM SPL (2)
 
DISPERSION
 
CROSSOVER
 
 
Audio input
 
CONNECTORS
 
ANALOGUE INPUT IMPEDANCE
 
MAXIMUM ANALOGUE INPUT LEVEL
 
Internal Processing
 
 
 
 
 
 
Network
 
CONNECTORS
 
PROTOCOL
 
Amplifier Module
 
TYPE
 
 
PEAK OUTPUT POWER
 
CONTINUOUS OUTPUT POWER
 
AVERAGE EFFICIENCY
 
COOLING
 
MAXIMUM AMBIENT TEMPERATURE
 
Power Supply
 
TYPE
 
AC INPUT OPERATING RANGE
 
POWER FACTOR
 
NOMINAL POWER CONSUMPTION
 
MAINS CONNECTOR
 
Mechanical
 
ENCLOSURE
 
FINISH
 
PROTECTIVE GRILLE
 
FITTINGS
 
 
 
 
IP RATING
 
DIMENSIONS
 
 
WEIGHT
 
ACCESSORIES
 
 
 
 
CDD‐LIVE User Guide V1.0 
 
 
 
 
USER GUIDE
Compact, Coaxial Differential Dispersion powered two-way system
62Hz – 20kHz ±3dB, -10dB @ 50Hz
LF: 12" (300mm)/2.5" (63.5mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1" (25mm) exit/1.7" (44mm) voice coil, polyimide dome compression driver
-18dBu for 100dB SPL
122dB continuous / 128dB peak
110°-60° horizontal, 60° vertical (user-rotatable)
1.8kHz Active LR8 with low latency HF FIR equalisation
Balance presets for pole mount/ pole mount with sub/ stage monitor
Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
20 kΩ balanced to ground
24.6 Vpp (+21dBu), over voltage protected
Multi-channel DSP, programmable via TCP/IP using VU-Net software
PEQ/shelving filters
Up to 48dB/Oct HPF
Low latency HF FIR filters
Up to 200ms input delay
Pre-set selection via rear panel switch
2xNeutrik® Ethercon
TCP/IP and UDP/IP
2 channel switch-mode, class D,
Bridged Tied Load + 1 channel switch-mode, class D
2500W
1250W
89%
External convection cooled, with internal fan
40°C (104°F) for full output
Switch mode, fixed frequency with PFC
85 – 265V ~ AC, 50 - 60Hz
> 0.98
550W
Neutrik® PowerCon True1
Extensively braced multi-laminate plywood.
Textured black PU coating.
HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black
grille cloth
Top hat for pole mounting
15 x M8 mounting points
Two side pocket handles
Optional weather protection cowl
IP24 factory option available
(W) 359mm x (H) 580mm x (D) 373mm
(W) 14.13in x (H) 22.83in x (D) 14.69in
28kg (61.6lbs) excluding Transit cover
Transit Cover
Optional wall, yoke and universal brackets
 
 
  
  
74
 
 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cddlive8Cddlive15Cddlive12

Table of Contents