Martin Audio CDD-LIVE! Series User Manual page 21

CDD‐LIVE
will self‐assign an IP address in the same range as the PC‐ this takes around 1 minute and after that it will be possible to
connect to the cabinet via Vu‐Net (see the chapter on Vu‐Net for more details). You CANNOT daisy chain more CDD‐Live
cabinets in this configuration, it can only be used with a single cabinet so its use is limited to simple checks or firmware
updates.
Dante is realised using the Ultimo board, this does not support Primary and Secondary connections but redundancy is possible
using an analogue audio feed simultaneously with a Dante network. The input will automatically select Dante is a signal is present
however it will automatically switch to the analogue feed if the Dante signal is lost.
The Ethernet ports have standard LED indicators to show operation. The Green LEDs show that the port is operational and should
illuminate as soon as a connection is made to or from an Ethernet port from any other port. The yellow LEDs flash to show data
speed. The Dante LED will illuminate when a Dante feed is present.
CDD‐LIVE User Guide V1.0
USER GUIDE
20