Konica Minolta BIZHUB PRESS C7000 Operation Quick Manual page 96

1-up Perfect Function
Perfect Binding - Cover Page
Cover Blank Mode
This is used when the perfect binding is employed with no printing made on the cover sheet.
The original set in the Cover Tray is handled as a cover sheet.
Ex.: When using "Cover Blank Mode" for the perfect binding.
Cover Print 1in1 Mode
This is used when arrangements are made in advance for the originals the front cover, the
back cover and the spine of which have been cut and pasted to the same size as the paper
used as the front cover.
When printing the both sides of the front cover, it is necessary to create the reverse side of
the front cover in advance.
Ex.: When using [Cover Print 1in1] for perfect binding.
• The use of PI Tray and Perfect Binder Cover Tray is not available for [Cover Print 1in1].
Cover Print 2in1 Mode
For the front cover, the first page and the last page (n page) of the originals are made as 2-in-
1, and the second page up to the last page but one (n - 1 page) are printed as the body of
documents with no printing made on the spine for perfect binding.
In addition, the width you set in the printer driver is reflected to the spine width.The setting
can range between 1 to 30 mm and it can be set in units of 0.1 mm.
Ex.: When using [Cover Print 2in1] for the perfect binding.
4-16
Chapter 4: Print Operation (IC-601)
Cover Blank
Cover Print 1in1 (for both sides)
Cover Print 2in1 (Both sides)