Konica Minolta BIZHUB PRESS C7000 Operation Quick Manual page 123

Chapter 7: Application
5.
In [Display name], enter the name displayed in e-mails sent
from the controller.
6.
In [Fiery Email Address], enter the address which the con-
troller uses to receive e-mails.
7.
From [Incoming mail server] - [Server type], select the type
of server and enter the name of the incoming mail server in
[Server].
8.
In [Incoming mail server] - [Port], enter the port number.
9.
If you enable SSL/TLS communication on receiving mails,
check [Incoming mail server] - [SSL/TLS] check box.
10.
In [Incoming mail server] - [User name] and [Password],
enter the user name and password which are used to con-
nect to the mail server.
11.
For [Polling Interval], specify the interval time how often the
controller communicates with the mail server.
12.
From [Outgoing mail server], enter the name of the outgo-
ing mail server in [Server].
13.
In [Outgoing mail server] - [Port], enter the port number.
14.
If you enable SSL/TLS communication on sending mails,
check [Outgoing mail server] - [SSL/TLS] check box.
15.
If you enable POP before SMTP, check [Add POP before
SMTP] check box.
16.
If you authenticate on sending mails, check [Authentication
required] check box and enter the user name and password
which are used for authentication.
About the network setting (Fiery controller)
[Next Page]
7-13