Command WorkStation (Fiery controller)
7.
Click [4. Get Measurements] - [Measure].
8.
Set [Page Type] and [Paper Size] in the displayed dialog box
and click [Measure].
9.
Scan the output paper with the measure tool.
10.
Click [Apply].
11.
Click [Exit].
• After measuring, you can confirm the measure result when you select [Measurement
Table] or [Measurement and Target] from [6. View Measurement (Option)] and click [View].
To compare the measurement and the target curves, select [Measurement and Target].
7-4
Chapter 7: Application