Paper Setting
5.
Press [OK].
6.
Press [Close].
The MACHINE screen will be restored.
●
• When "Plain" or "Fine" is applied to the tray as paper type, the default value of [Humidifier
Setting] is [ON]. In case of "Specified Color" or "Coated", it is [OFF]. If the paper type is
changed, these values will be applied but you can change it. However, in case of "Speci-
fied Color" or "Coated" more than 135 g/m
change it.
• [Curl Adjustment] can be set also on the Register Type/Weight screen accessed from
Utility Screen displayed by pressing the [Utility/Counter] on the control panel.
1-30
Chapter 1: Preparation for Use
2
, it becomes unavailable and you can't