Smb Setting - Konica Minolta BIZHUB PRESS C7000 Operation Quick Manual

Chapter 7: Application

SMB Setting

To enable SMB setting is necessary to use the SMB printing function and the Scan to SMB
function.
1.
Press [Utility/Counter] on the control panel.
2.
Press [Administrator Setting] - [Controller] - [Controller NIC
Setting Menu] - [SMB Setting].
3.
Select [Enable] for [SMB Send Setting] and [Print Setting].
4.
Set the other settings as required and press [OK].
• About the details of settings, refer to the User's Guide - POD Administrator's Reference.
About the network setting (IC-601)
7-17