Zenith z-server lt User Manual page 77

(F4-17 54840012)
Note: Refer to the Option Boards appendix for slot
assignments.
7. Align the rounded notch in the retaining bracket with the
threaded hole in the expansion slot frame. The retaining
bracket fits into the space that was occupied by the
expansion slot cover.
8. Reinstall the screw in the threaded hole. Be sure to push the
bracket slot up against the screw before you tighten it. If this
is not done, the bracket may interfere with an adjacent
bracket.
9. If you have not installeed a SCSI host adapter board, go to
step 12, otherwise continue.
4-29
Upgrades and Options